Poor Flush, the water level is below water line mark
Solution: The shut off valve is not completely open; verify that the shut off valve opens fully. The water supply line can be twisted, ensure that it is sitting in the tank properly. Adjust fill valve level (see instructional video).
Parts Needed:
- Fill Valve with float
- Flush Valve with Flapper
- Large Rubber Gasket
- Tank Lever
Continuous water running
Solution: It may occur if the flush seal is not completely closed. Verify if there is any obstruction with the flush seal and that the seal is in contact with the valve lip.
Parts Needed:
- Fill Valve with float
- Flush Valve with Flapper
- Large Rubber Gasket
- Tank Lever
Water running; may occur if the flapper is not completely closed
Solution: Verify if there is any obstruction with the flapper. If the chain is too tight on the flapper, try loosening the chain. Make sure that the elastic band is removed from the flapper.
Parts Needed:
- Flapper
- Flush Valve with Flapper